Normaly you can toggle that with the button at the end of the stalk on the right.harrythebiker schreef:Hello,
My name ist Harald and i'm from Austria. Im driving a Peugeot 406 Break D9.
I have a question to the On-bord-computer. My OBC only shows the outside temperatur and the time but no information about the fuel consumption.
In the first post in this thred "axl" wrote about a cable an programming (translated by google ).
Does anyone know how to add the functions for the fuel consumtion and so on.
Can anyone tell me how to do in english or german?
Best reguards
Harald
mijn 406 break modificaties
Re: mijn 406 break modificaties
406 coupé 3.0 V6 Pack LPI (2004) Vert Polo - "Let's poke it with the Stig"
Re: mijn 406 break modificaties
Hello,
Thank you for your answer!
I have tried this. I can switch the funktions in the display. But there are only 3 lines like you can see on the photo of Axel.
So the funktions itself i can switch through but there are only the 3 lines.
Best reguards
Harry
Thank you for your answer!
I have tried this. I can switch the funktions in the display. But there are only 3 lines like you can see on the photo of Axel.
So the funktions itself i can switch through but there are only the 3 lines.
Best reguards
Harry
Re: mijn 406 break modificaties
So you can scroll trough the functions but they give no info? If that is the case they might have to be activated with a diagnostic device like the PP2000.
BMW 330xD Coupe High Executive (E92)
Peugeot 406 Coupe 2.2 HDiF PACK (D9 Full MUX) (verkocht na bijna 9 jaar, eindstand teller 614.040 km)
Peugeot 406 Coupe 2.2 HDiF PACK (D9 Full MUX) (verkocht na bijna 9 jaar, eindstand teller 614.040 km)
Re: mijn 406 break modificaties
Exactly. I can scroll through but there are no infos.
Mayby someone can check that?
Mayby someone can check that?
Re: mijn 406 break modificaties
heb ook alleen maar weergave van datum+ temperatuur.
Knop op uiteinde ruitenwisser reageert niet, iemand enig idee waar het in kan zitten?
In pp2000 staat boordcomputer op aanwezig,
Knop op uiteinde ruitenwisser reageert niet, iemand enig idee waar het in kan zitten?
In pp2000 staat boordcomputer op aanwezig,
Peugeot 406coupe 2.2HDI 2002 D9 full mux
Wie is er online
Gebruikers op dit forum: Geen geregistreerde gebruikers en 6 gasten